Unit 20, Dales Court Business Centre

95 Dales Road, Ipswich

Suffolk, IP1 4JR

Maljon Timber Preservation Logo

Request A Call Back or Email

01473 747559

office@maljon.co.uk


PLASTERING

Plastering

LOCAL COMPANY WITH A 5-STAR REPUTATION


PLASTERING

Re-plastering often involves the use of a dense sand and cement render as a backing coat that incorporates a waterproof additive. A gypsum skim coat is then applied for a smooth finish.

We recommend that when damp proofing works are carried out that the wall plaster is removed from the floor level up to at minimum height of 1 meter or just past the last signs of dampness. This is to eliminate the hygroscopic action of salts within the old original wall plaster. 

Hygroscopic salts have the ability to absorb moisture from the surrounding environment and the amount of moisture absorbed is dependent on the type and quantity of the particular salt and the humidity of the surrounding environment. Hygroscopic salts can cause masonry to remain damp even though there is no source of water ingress; wallpaper, especially, can become very damp solely due to contamination with hygroscopic salts. 
DECORATION

After a re-plastering is completed, at least two weeks must pass, and all areas must be visibly dry before the new plaster can be decorated. This should only be done with a water-based permeable emulsion, without the use of vinyl paints, and do not wallpaper the treated areas for a minimum of 1 year.

When applying the emulsion, apply 1 coat of a mist-coat to the walls before applying a full coat of emulsion. To make a mist coat, mix three parts of water with one part of the emulsion. You should always check the paint tin for the manufacturer's instructions as ratios can vary. You don't have to use the exact same paint you've chosen for the final topcoat but you should use a similar colour for an even finish.
Share by: